Метою дослідження була оцінка рівня інтеграції цифрових інформаційних технологій у будівельну галузь у країнах Східної Європи. Зібрано кількісні дані щодо впровадження сервісів інформаційного моделювання будівель (BIM) у країнах Східної Європи та проведено порівняльний аналіз динаміки їх використання у 2020-2023 роках. Результати дослідження свідчать про значну різницю в рівні впровадження BIM у країнах Східної Європи, що тісно пов’язано з рівнем економічного розвитку, станом будівельної галузі та підтримкою з боку державних органів. Країни з більш розвиненою економікою та стабільною нормативно-правовою базою, такі як Польща та Чехія, продемонстрували найвищі темпи впровадження BIM. У цих країнах різні BIM-сервіси активно використовуються на всіх етапах життєвого циклу будівельного проєкту – від проєктування та моделювання до управління будівництвом та експлуатації об’єкта. Державна підтримка в цих країнах включає розробку національних стандартів, введення обов’язкових вимог щодо використання BIM у державних тендерах та реалізацію освітніх програм для підвищення кваліфікації фахівців, що сприяє активному впровадженню технологій і підвищенню ефективності будівельної галузі. З іншого боку, в країнах з менш розвиненою економікою та обмеженою державною підтримкою процес інтеграції BIM відбувається повільніше. У таких країнах як Україна, Болгарія та Румунія, BIM застосовується переважно в окремих проєктах, але масове впровадження BIM стримується відсутністю національних стандартів, недостатньою кількістю кваліфікованого персоналу та низькою обізнаністю учасників ринку. Отримані результати можуть бути використані для визначення ключових факторів, що впливають на успіх впровадження BIM у будівельній галузі, і можуть бути використані в майбутньому для подальшої розробки ефективних стратегій діджиталізації в регіоні
інформаційне моделювання; будівельні процеси; динаміка використання; управління проектами; стратегії розвитку
Отримано 12.08.2024, Доопрацьовано 15.10.2024, Прийнято 18.12.2024
Взято з Том 10, № 2, 2024
https://doi.org/10.56318/as/2.2024.124
Сторінки 124-135
[1] Abobakirov, A., & Omonboev, O. (2023). Advantages of Building Information Modeling (BIM) technologies in construction. Holders of Reason, 1(3), 399-405.
[2] Al-Ashmori, Y.Y., Othman, I., Rahmawati, Y., Amran, Y.H.M., Sabah, S.H.A., Rafindadi, A.D., & Mikić, M. (2020). BIM benefits and its influence on the BIM implementation in Malaysia. Ain Shams Engineering Journal, 11(4), 1013-1019. doi: 10.1016/j.asej.2020.02.002.
[3] Alshorafa, R., & Ergen, E. (2021). Determining the level of development for BIM implementation in large-scale projects: A multi-case study. Engineering, Construction and Architectural Management, 28(1), 397-423. doi: 10.1108/ECAM-08-2018-0352.
[4] Andrukhov, V., & Potekha, A. (2023). Ways of transition and implementation of BIM as a key factor in the modernization of the construction industry. In Proceedings of VNTU Conferences. Vinnytsia: Vinnytsia National Technical University.
[5] Andrukhov, V., Potіekha, A., & Bassist, V. (2024). Feasibility assessment of using BIM technologies for a construction project. Modern Technologies, Materials and Structures in Construction, 21(1), 161-165. doi: 10.31649/2311-1429-2024-1-161-165.
[6] Baarimah, A.O., Alaloul, W.S., Liew, M.S., Al-Aidrous, A.-H.M.H., Alawag, A.M., & Musarat, M.A. (2021). Integration of Building Information Modeling (BIM) and value engineering in construction projects: A bibliometric analysis. In 2021 3rd international sustainability and resilience conference: Climate change (pp. 362-367). Sakheer: Institute of Electrical and Electronics Engineers. doi: 10.1109/IEEECONF53624.2021.9668045.
[7] Bruggeman, E.M. (2020). Legal aspects of Building Information Modelling: The “Dutch approach”: An overview. Delft: Delft University of Technology.
[8] Casasayas, O., Hosseini, M.R., Edwards, D.J., Shuchi, S., & Chowdhury, M. (2021). Integrating BIM in higher education programs: Barriers and remedial solutions in Australia. Journal of Architectural Engineering, 27(1). doi: 10.1061/(ASCE)AE.1943-5568.0000444.
[9] Chen, X., He, Q., Zhang, X., Cao, T., & Liu, Y. (2021). What motivates stakeholders to engage in collaborative innovation in the infrastructure megaprojects? Journal of Civil Engineering and Management, 27(8), 579-594. doi: 10.3846/jcem.2021.15612.
[10] Commission Delegated Regulation (EU) No. 2023/2497 “Amending Directive 2014/23/EU of the European Parliament and of the Council in Respect of the Thresholds for Concessions”. (2023, November). Retrieved from https://eur-lex.europa.eu/eli/reg_del/2023/2497/oj.
[11] Concept of introducing the BIM method in the Czech Republic. (2017). Retrieved from https://www.mpo.gov.cz/en/construction-and-raw-materials/bim/concept-of-introducing-the-bim-method-in-the-czech-republic---233659/.
[12] Decree of the Minister of Development and Technology of Poland No. 45 “On the Construction Log and the Electronic Construction Log System”. (2022, January). Retrieved from https://eli.gov.pl/api/acts/DU/2023/45/text/O/D20230045.pdf.
[13] Digital transformation of Bulgaria for the period 2020-2030. (2020). Retrieved from https://www.mtc.government.bg/sites/default/files/digital_transformation_of_bulgaria_for_the_period_2020-2030_f.pdf.
[14] Digitization of the Construction Process in Poland. (2022). Retrieved from https://g4bim.com/blog/bim-implementation-in-poland/.
[15] Directive No. 2014/24/EU of the European Parliament and of the Council “On Public Procurement and Repealing Directive 2004/18/EC”. (2014, February). Retrieved from http://data.europa.eu/eli/dir/2014/24/oj.
[16] Dmytrenko, Ye., Usenko, M., & Yakovenko, I. (2024). Collisions of strength determination modeling for eccentrically compressed reinforced concrete constructions with small eccentricities by normal sections in Lira-FEM Software. In Z. Blikharskyy & V. Zhelykh (Eds.), Proceedings of EcoComfort 2024 (pp. 50-63). Cham: Springer. doi: 10.1007/978-3-031-67576-8_5.
[17] Eurostat Database. (n.d.). Retrieved from https://ec.europa.eu/eurostat/web/main/data/database.
[18] Fiamma, P., & Biagi, S. (2023). Critical approaches on the changes taking place after 24/2014/EU in BIM adoption process. Buildings, 13(4), article number 850. doi: 10.3390/buildings13040850.
[19] Ganah, A., & Lea, G. (2021). A global analysis of BIM standards across the globe: A critical review. Journal of Project Management Practice, 1(1), 52-60. doi: 10.22452/jpmp.vol1no1.4.
[20] Girginkaya Akdag, S., & Maqsood, U. (2020). A roadmap for BIM adoption and implementation in developing countries: The Pakistan case. Archnet-IJAR: International Journal of Architectural Research, 14(1), 112-132. doi: 10.1108/ARCH-04-2019-0081.
[21] Guidelines for Digital Construction in Lithuania 2014-2020. (2014). Retrieved from https://skaitmeninestatyba.lt/wp-content/uploads/2017/12/140724_Skaitmenines_statybos_Lietuvoje_2014-2020_GAIRES_v21.pdf.
[22] Kang, K.-Y., Wang, X., Wang, J., Xu, S., Shou, W., & Sun, Y. (2022). Utility of BIM-CFD integration in the design and performance analysis for buildings and infrastructures of architecture, engineering and construction industry. Buildings, 12(5), article number 651. doi: 10.3390/buildings12050651.
[23] Kramskyі, S., Kolodinskyi, S., & Zakharchenko, O. (2023). Conceptual model for managing the phases of implementation of infrastructure projects and programmes in the post-war period. Scientific Bulletin of Mukachevo State University. Series “Economics”, 10(3), 33-40. doi: 10.52566/msu-econ3.2023.33.
[24] Kudabayev, R., et al. (2022). Construction of a model for an enclosing structure with a heat-accumulating material with phase transition taking into account the process of solar energy accumulation. Eastern-European Journal of Enterprise Technologies, 6(8(120)), 26-37. doi: 10.15587/1729-4061.2022.268618.
[25] Latvian National Standard (LVS) No. 1052:2018 “Building Information Modelling (BIM) Terminology”. (2018, January). Retrieved from https://www.lvs.lv/lv/products/137429.
[26] Levchenko, O., Antonenko, N., & Kosarevska, R. (2022). Ways to overcome the implementation problems of BIM-technology related to the national standards in the architectural and building industry of Ukraine. Architecture, Civil Engineering, Environment, 15(1), 29-38. doi: 10.21307/acee-2022-003.
[27] Marzouk, M., & Elmaraghy, A. (2021). Design for deconstruction using integrated lean principles and BIM approach. Sustainability, 13(14), article number 7856. doi: 10.3390/su13147856.
[28] Mesároš, P., Mandičák, T., & Behúnová, A. (2020). Use of BIM technology and impact on productivity in construction project management. Wireless Networks, 28(2), 855-862. doi: 10.1007/s11276-020-02302-6.
[29] Nenastina, T., Berezhna, K., Sakhnenko, M., & Buhaievskyi, S. (2024). Degradation of reinforced concrete construction of bridge structures: Corrosion aspect. Materials Science, 59(5), 538-545. doi: 10.1007/s11003-024-00809-3.
[30] Piddubna, L., Dybach, I., Krasovskiy, V., Pliekhanov, K., & Mogylevskyi, R. (2024). Analysis of the impact of digital development on a country’s economic growth. Economics of Development, 23(2), 38-46. doi: 10.57111/econ/2.2024.38.
[31] Pidgeon, A., & Dawood, N. (2023). BIM adoption issues in infrastructure construction projects: Analysis and solutions. Journal of Information Technology in Construction, 26, 263-285. doi: 10.36680/j.itcon.2021.015.
[32] Roadmap for the implementation of BIM methodology in public procurement. (2021). Retrieved from https://chambers.com/articles/roadmap-for-the-implementation-of-bim-methodology-in-public-procurement.
[33] Saber, N.I., & Wali, K.I. (2020). A study of current situation, difficulties, and advantages of implementing BIM in the construction sector in Northern Iraq. Zanco Journal of Pure and Applied Sciences, 32(2), 93-106. doi: 10.21271/ZJPAS.32.2.10.
[34] Sakib, S.M.N. (2020). Strategies, potentials and uses of BIM. Retrieved from https://ideas.repec.org/p/osf/socarx/mbcj4.html.
[35] Samimpay, R., & Saghatforoush, E. (2020). Benefits of implementing Building Information Modeling (BIM) in infrastructure projects. Journal of Engineering, Project, and Production Management, 10(2), 123-140. doi: 10.2478/jeppm-2020-0015.
[36] Semaan, J., Underwood, J., & Hyde, J. (2021). An investigation of work-based education and training needs for effective BIM adoption and implementation: An organisational upskilling model. Applied Sciences, 11(18), article number 8646. doi: 10.3390/app11188646.
[37] Szabó, K. (2023). BIM-paved roads around Visegrád: The implementation and scientific feedback/analysis of Building Information Modelling in V4 countries. Law State Politics, 15(4), 91-114. doi: 10.58528/JAP.2023.15-4.91.
[38] Tönis, K.J.M., & Voordijk, H. (2023). Advantages and disadvantages of BIM use: Differences between experiences of its users and expectations of its non-users. International Journal of the Built Environment and Asset Management (IJBEAM), 2(3), 183-209. doi: 10.1504/IJBEAM.2023.130528.
[39] Toyin, J.O., & Mewomo, M.C. (2022). Critical review of the impacts of successful BIM technology application on construction projects. In T.C. Haupt, M. Akinlolu, F. Simpeh, C. Amoah & Z. Armoed (Eds.), Construction in 5D: Deconstruction, digitalization, disruption, disaster, development (pp. 65-77). Cham: Springer. doi: 10.1007/978-3-030-97748-1_6.
[40] Trach, R., Pawluk, K., & Lendo-Siwicka, M. (2022). The assessment of the effect of BIM and IPD on construction projects in Ukraine. International Journal of Construction Management, 22(10), 1844-1851. doi: 10.1080/15623599.2020.1742636.
[41] Tushar, Q., Bhuiyan, M.A., Zhang, G., & Maqsood, T. (2021). An integrated approach of BIM-enabled LCA and energy simulation: The optimized solution towards sustainable development. Journal of Cleaner Production, 289, article number 125622. doi: 10.1016/j.jclepro.2020.125622.
[42] Vision of e-construction platform. (2018). Retrieved from https://eehitus.ee/wp-content/uploads/2019/07/e-construction-platform-vision-ENG.pdf.
[43] Voloshyn, M., & Petiakh, A. (2021). BIM technologies in construction. In Modern technologies and achievements of engineering sciences in the field of hydraulic engineering construction and water engineering (pp. 176-179). Kherson: Kherson State Agrarian and Economic University.
[44] Wang, L., Huang, M., Zhang, X., Jin, R., & Yang, T. (2020). Review of BIM adoption in the higher education of AEC disciplines. Journal of Civil Engineering Education, 146(3). doi: 10.1061/(ASCE)EI.2643-9115.0000018.
[45] Xie, M., Qiu, Y., Liang, Y., Zhou, Y., Liu, Z., & Zhang, G. (2022). Policies, applications, barriers and future trends of Building Information Modeling technology for building sustainability and informatization in China. Energy Reports, 8, 7107-7126. doi: 10.1016/j.egyr.2022.05.008.
[46] Xing, M., Cao, J., & Cao, D. (2023). Impacts of policy mix comprehensiveness on BIM implementation: Moderating effects of environmental state and response uncertainty. Journal of Construction Engineering and Management, 149(2). doi: 10.1061/JCEMD4.COENG-12716.
[47] Yuan, H., & Yang, Y. (2020). BIM adoption under government subsidy: Technology diffusion perspective. Journal of Construction Engineering and Management, 146(1). doi: 10.1061/(ASCE)CO.1943-7862.0001733.